ProCurve Networking Switch 3400cl Series
Multilayer, high port density switches providing scalable, reliable network infrastructures

ProCurve Networking Switch 3400cl Series Overview:

The ProCurve Switch 3400cl series consists of exceptionally affordable 24- and 48-port 10/100/1000 intelligent edge stackables with optional 10-Gigabit uplinks* and stacking capability. Created in response to the growing need for network capacity in a world where high-demand applications are becoming common, these standards-based Layer 3 switches provide outstanding performance, traffic management, and access control capabilities. The result is an efficient, secure, high-throughput, multi-service network that is able to handle the demands of today's applications as well as those that will emerge in the future. *Requires ProCurve Switch cl 10-GbE Media Flex Module (J8435A)

• Access layer
• Layer 2 - Layer 4 and intelligent edge feature set
• Scalable 10/100/1000 connectivity
• 10-GbE uplinks

Features:

Connectivity:

• Dual-personality functionality: four 10/100/1000 ports or mini-GBIC slots for optional fiber connectivity such as Gigabit-SX, -LX, or -LH
• Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports

Performance:

• 88 Gbps backplane with 64 million pps (ProCurve 3400cl-24G) and 136 Gbps backplane with 99.5 million pps (ProCurve 3400cl-48G): up to ten times the bandwidth for low-latency throughput
• Selectable queuing configurations: increase performance by selecting the queuing configuration that best meets the requirements of network applications
• Jumbo frames: on Gigabit and 10-Gigabit ports, allow high-performance remote backup and disaster-recovery services (up to 4 ports per module on Gigabit modules)

Resiliency and high availability:

• Router redundancy (XRRP): allows groups of two routers to dynamically back each other up to create highly available routed environments
• IEEE 802.3ad Link Aggregation Control Protocol (LACP) and ProCurve trunking: support up to 25 trunks, each with up to 8 links (ports) per trunk
• IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees
• IEEE 802.1w Rapid Convergence Spanning Tree Protocol: increases network uptime through faster recovery from failed links
• Optional redundant power supply: provides uninterrupted power (provided by ProCurve 600 RPS/EPS)

Layer 2 switching:

• ProCurve switch meshing: dynamically load-balances across multiple active redundant links to increase available aggregate bandwidth
• VLAN support and tagging: supports the IEEE 802.1Q (4,096 VLAN IDs) and 256 VLANs simultaneously
• GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs
• IEEE 802.1v protocol VLANs: isolate select non-IPv4 protocols automatically into their own VLANs

Layer 3 routing:

• Layer 3 IP routing: provides routing of IP at media speed; supports static routes, RIP, RIPv2, and OSPF

Security:

• Access control lists (ACLs): provide IP Layer 3 filtering based on source/destination IP address/subnet and source/destination TCP/UDP port number
• Dynamic ARP protection: blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
• Port security: allows access only to specified MAC addresses, which can be learned or specified by the administrator
• Source-port filtering: allows only specified ports to communicate with each other
• TACACS+: eases switch management security administration by using a password authentication server
• Secure Shell (SSHv2): encrypts all transmitted data for secure, remote command-line interface (CLI) access over IP networks
• Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
• IEEE 802.1X: industry-standard way of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server
• MAC address lockout: prevents configured particular MAC addresses from connecting to the network
• Web-based authentication: similar to IEEE 802.1X, provides a browser-based environment to authenticate clients that do not support the IEEE 802.1X supplicant
• Secure FTP: allows secure file transfer to/from the switch; protects against unwanted file downloads or unauthorized copying of switch configuration file
• Secure management access: all access methods--CLI, GUI, or MIB--are securely encrypted through SSHv2, SSL, and/or SNMPv3

Convergence:

• IP multicast routing (PIM Dense): routes IP multicast traffic using the PIM Dense routing protocol
• IP multicast snooping and data-driven IGMP: automatically prevents flooding of IP multicast traffic

Quality of Service (QoS):

• Rate limiting: per-port ingress enforced maximums
• Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers
• Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into 8 priority levels mapped to 4 queues
• Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), L3 protocol, TCP/UDP port number, source port, and DiffServ

Manageability:

• sFlow (RFC 3176): wire-speed traffic accounting and monitoring
• RMON, XRMON, and SMON: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
• Find-Fix-and-Inform: finds and fixes common network problems automatically, then informs administrator
• Dual flash images: provides independent primary and secondary OS files for backup while upgrading
• Friendly port names: allow assignment of descriptive names to ports
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automated device discovery protocol for easy mapping by network management applications
• Stacking capability: single IP address management for a virtual stack of up to 16 switches, including the ProCurve 2500 series, 2510 series, 2600 series, 2800 series, 2810 series, 2900 series, 3400cl series, 3500yl series, 4200vl series, 6108, 6200yl-24G-mGBIC, and 6400cl series

Specifications:

Model	3400cl-24G (J4905A)		3400cl-48G (J4906A)
	(Enlarge Image)		(Enlarge Image)
Port
	1 open module slot 20 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T) Media Type: Auto-MDIX Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only 1 RS-232C DB-9 console port 4 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers) Supports a maximum of 24 auto-sensing 10/100/1000 ports plus 2 10-GbE ports		1 open module slot 44 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T) Media Type: Auto-MDIX Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only 1 RS-232C DB-9 console port 4 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers) Supports a maximum of 48 Gigabit ports plus 2 10-GbE ports
Physical characteristics
Dimensions	14.45(d) x 17.32(w) x 1.73(h) in. (36.7 x 44.0 x 4.4 cm) (1U height)		16.93(d) x 17.32(w) x 1.73(h) in. (43 x 44 x 4.4 cm) (1U height)
Weight	10.27 lb. (4.66 kg)		10.84 lb. (4.92 kg)
Memory and processor
Processor	Motorola PowerPC MPC8245 @ 266 MHz, 16 MB flash, 128 MB SDRAM; packet buffer size: 2 MB (1 MB per 12 ports)		Motorola PowerPC MPC8245 @ 266 MHz, 16 MB flash, 128 MB SDRAM; packet buffer size: 4 MB (1 MB per 12 ports)
Mounting
	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Performance
1000 Mb Latency	< 6 μs
10 Mb Latency	< 10 μs
Throughput	up to 64 million pps		up to 99.5 million pps
Routing Switching capacity	88 Gbps		136 Gbps
Routing table size	64000 entries
Environment
Operating temperature	32ºF to 104ºF (0ºC to 40ºC); when used with any X2 10-GbE
Operating relative humidity	15% to 95% @ 104ºF (40ºC), non-condensing
Non-operating/Storage temperature	-40ºF to 158ºF (-40ºC to 70ºC)
Non-operating/Storage relative humidity	15% to 90% @ 149ºF (65ºC), non-condensing
Altitude	up to 15000 ft. (4.6 km)
Acoustic	Power: 53 dB; DIN 45635T.19 per ISO 7779 @
Electrical characteristics
Description	The switch automatically adjusts to any voltage between 100-127 and 200-240 V and either 50 or 60 Hz
Maximum heat dissipation	307 BTU/hr (324 kJ/hr), including use of optional cl module with optics		482 BTU/hr (509 kJ/hr), including use of optional cl module with optics
Voltage	100-127 / 200-240 VAC
Current	2.0 / 1.0 A		3.0 / 1.5 A
Power consumption	90 W		141 W
Frequency	50 / 60 Hz
Notes	Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. Power Consumption data is MAX value. Max BTUs includes use of optional n>
Safety
	CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
Emissions
	FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Immunity
EN	EN 55024, CISPR 24
ESD	IEC 61000-4-2; 4 kV CD, 8 kV AD
Radiated	IEC 61000-4-3; 3 V/m
EFT/Burst	IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
Surge	IEC 61000-4-5; 1 kV/2 kV AC
Conducted	IEC 61000-4-6; 3 V
Power frequency magnetic field	IEC 61000-4-8; 1 A/m, 50 or 60 Hz
Voltage dips and interruptions	IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods
Harmonics	EN 61000-3-2, IEC 61000-3-2
Flicker	EN 61000-3-3, IEC 61000-3-3
Management
	ProCurve Manager Plus; ProCurve Manager (included); command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C)
Notes
	Other mini-GBICs supported: J4858A ProCurve Gigabit-SX-LC Mini-GBIC J4859A ProCurve Gigabit-LX-LC Mini-GBIC J4860A ProCurve Gigabit-LH-LC Mini-GBIC

Standards and Protocols
Device Management HTML and telnet management General Protocols IEEE 802.1D MAC Bridges IEEE 802.1p Priority IEEE 802.1Q EE 802.1s Multiple Spanning Trees IEEE 802.1v VLAN classification by Protocol and Port IEEE 802.1w Rapid Reconfiguration of Spanning Tree IEEE 802.3ad Link Aggregation Control Protocol (LACP) IEEE 802.3x Flow Control RFC 768 UDP RFC 783 TFTP Protocol (revision 2) RFC 792 ICMP RFC 793 TCP RFC 826 ARP RFC 854 TELNET RFC 951 BOOTP RFC 1058 RIPv1 RFC 1542 BOOTP Extensions RFC 2030 Simple Network Time Protocol (SNTP) v4 RFC 2131 DHCP RFC 2453 RIPv2	RFC 3046 DHCP Relay Agent Information Option IP Multicast RFC 3376 IGMPv3 MIBs RFC 1213 MIB II RFC 1493 Bridge MIB RFC 1724 RIPv2 MIB RFC 1850 OSPFv2 MIB RFC 2021 RMONv2 MIB RFC 2096 IP Forwarding Table MIB RFC 2618 RADIUS Client MIB RFC 2620 RADIUS Accounting MIB RFC 2665 Ethernet-Like-MIB RFC 2668 802.3 MAU MIB RFC 2674 802.1p and IEEE 802.1Q Bridge MIB RFC 2737 Entity MIB (Version 2) RFC 2863 The Interfaces Group MIB RFC 2925 Ping MIB Network Management IEEE 802.1AB Link Layer	Discovery Protocol (LLDP) RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events) RFC 3164 BSD syslog Protocol RFC 3176 sFlow SNMPv1/v2c/v3 XRMON OSPF RFC 2328 OSPFv2 QoS/Cos RFC 2474 DiffServ Precedence, including 8 queues/port RFC 2597 DiffServ Assured Forwarding (AF) RFC 2598 DiffServ Expedited Forwarding (EF) Security IEEE 802.1X Port Based Network Access Control RFC 1492 TACACS+ RFC 2138 RADIUS Authentication RFC 2866 RADIUS Accounting Secure Sockets Layer (SSL) SSHv1/SSHv2 Secure Shell

Accessories:

ProCurve Gigabit-SX-LC Mini-GBIC (J4858C)
A small form factor pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550 m on multimode fiber.	Ports 1 LC 1000Base-SX port (IEEE 802.3z Type 1000Base-SX) Duplex: full only Physical characteristics Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm) Weight: 0.04 lb. (0.02 kg) Cabling Type: 62.5/125 μm or 50/125 μm (core/cladding) diameter, graded-index,	low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively Maximum distance: 220 m (62.5 μm core diameter, 160 MHz/km bandwidth) 275 m (62.5 μm core diameter, 200 MHz/km bandwidth) 500 m (50 μm core diameter, 400 MHz/km bandwidth) 550 m (50 μm core diameter, 500 MHz/km bandwidth
ProCurve Gigabit-LX-LC Mini-GBIC (J4859C)
A small form factor pluggable (SFP) Gigabit LX transceiver that provides a full-duplex Gigabit solution up to 10 km (singlemode) or 550 m (multimode).	Ports 1 LC 1000Base-LX port (IEEE 802.3z Type 1000Base-LX) Duplex: full only Physical characteristics Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm) Weight: 0.04 lb. (0.02 kg) Cabling Type: Either single mode or multimode 62.5/125 μm or 50/125 μm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC	793-2 Type A1b or A1a, respectively Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1 Maximum distance: 10 km (single mode) or 550 m (multimode) Notes A mode conditioning patch cord may be needed in some multimode fiber installations.
ProCurve Gigabit-LH-LC Mini-GBIC (J4860C)
A small form factor pluggable (SFP) Gigabit LH transceiver that provides a full-duplex Gigabit solution up to 70 km on singlemode fiber.	Ports 1 LC 1000Base-LH port (no IEEE standard exists for 1550 nm optics) Duplex: full only Physical characteristics Dimensions: 2.17(d) x 0.60(w) x 0.46(h) in. (5.5 x 1.53 x 1.18 cm) Weight: 0.04 lb. (0.02 kg) p>	Cabling Type: Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1 Maximum distance: 70 km
ProCurve 10-GbE X2-SC SR Optic (J8436A)
An X2 form-factor transceiver that supports the 10-Gigabit SR standard, providing 10-Gigabit connectivity up to 300 meters on multimode fiber.	Ports 1 SC 10-GbE port (IEEE 802.3ae Type 10Gbase-SR) Duplex: full only Physical characteristics Dimensions: 3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x 1.09 cm) Weight: 0.64 lb. (0.29 kg) Environment Operating temperature: 32ºF to 104ºF (0ºC to 40ºC) Operating relative humidity: 15% to 95%, non-condensing Cabling Type: • 62.5/125 μm or 50/125 μm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC	793-2 Type A1b or A1a, respectively Maximum distance: • 62.5 μm multimode cable @ 160 MHz*km = 2-26 meters • 62.5 μm multimode cable @ 200 MHz*km = 2-33 meters • 50 μm multimode cable @ 400 MHz*km = 2-66 meters • 50 μm multimode cable @ 500 MHz*km = 2-82 meters • 50 μm multimode cable @ 2000 MHz*km = 2-300 meters Notes 850 nm serial optics For fiber patch cords, use UPC (Ultra Physical Contact) surface termination/polish. APC (Angled Physical Contact) is not recommended.
ProCurve 10-GbE X2-SC LR Optic (J8437A)
An X2 form-factor transceiver that supports the 10-Gigabit LR standard, providing 10-Gigabit connectivity up to 10 km on singlemode fiber.	Ports 1 SC 10-GbE port (IEEE 802.3ae Type 10Gbase-LR) Duplex: full only Physical characteristics Dimensions: 3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x 1.09 cm) Weight: 0.16 lb. (0.07 kg) Environment Operating temperature: 32ºF to 104ºF (0ºC to 40ºC) Operating relative humidity: 15% to 95%, non-condensing Cabling Type: • Low metal content, single-mode fiber-optic, complying with ITU-T G.652	and ISO/IEC 793-2 Type B1 Maximum distance: • 9/125 μm single-mode cable = 2 m-10 km Notes 1310 nm serial optics Conditioning patch cord cables are not supported For fiber patch cords, use UPC (Ultra Physical Contact) surface termination/polish. APC (Angled Physical Contact) is not recommended.
ProCurve 10-GbE X2-SC ER Optic (J8438A)
An X2 form-factor transceiver that supports the 10-Gigabit ER standard, providing 10-Gigabit connectivity up to 30 km on singlemode fiber (40 km on engineered links).	Ports 1 SC 10-GbE port (IEEE 802.3ae Type 10Gbase-ER) Duplex: full only Physical characteristics Dimensions: 3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x 1.09 cm) Weight: 0.15 lb. (0.07 kg) Environment Operating temperature: 32ºF to 104ºF (0ºC to 40ºC) Operating relative humidity: 15% to 95%, non-condensing Cabling Type: • Low metal content, single-mode	fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1 Maximum distance: • 30 km (40 km on engineered links) Notes 1550 nm serial optics Conditioning patch cord cables are not supported For fiber patch cords, use UPC (Ultra Physical Contact) surface termination/polish. APC (Angled Physical Contact) is not recommended.
PProCurve 10-GbE X2-CX4 Transceiver (J8440B)
An X2 form-factor transceiver with a CX4 connector that provides 10-Gigabit connectivity up to 15 meters over CX4 (copper) cable.	Ports 1 CX4 transceiver port Physical characteristics Dimensions: 3.54(d) x 1.42(w) x 0.53(h) in. (8.99 x 3.61 x 1.35 cm) Weight: 0.18 lb. (0.08 kg) Environment Operating temperature: 32ºF to 131ºF (0ºC to 55ºC) Operating relative humidity: 15% to 95% @ 149ºF (65ºC), non-condensing Maximum distance: • 15 m using CX4 cables • 300 m using	optical media converters and multimode fiber cable Notes Connector: CX4; Duplex: full Use CX4 10-GbE cable (0.5-15 m) or ProCurve 10-GbE CX4 Media Converter (J8439A).

FAQ:

» ProCurve 10-GbE Transceivers FAQ

» ProCurve Mini-GBICs and SFPs FAQ

Documentation:

Download the ProCurve Switch 3400cl series Datasheet (PDF).