ProCurve Networking Switch 3500 Series
Multilayer, high port density switches providing scalable, reliable network infrastructures

ProCurve Networking Switch 3500yl/3500 Series Overview:

The HP ProCurve Switch 3500 Series consists of the most advanced intelligent edge switches in the HP ProCurve Networking product line. The 3500 series includes 24-port and 48-port stackables. The foundation for all these switches is a purpose-built, programmable ProVision ASIC that allows the most demanding networking features, such as Quality of Service (QoS) and security, to be implemented in a scalable yet granular fashion. With a variety of Gigabit and 10/100 interfaces, integrated PoE and Non-PoE options,10-GbE capability on Gigabit switches, the 3500 switches offer excellent investment protection, flexibility, and scalability, as well as ease of deployment, operation, and maintenance.

• Advanced access layer & Small Distribution
• Enterprise-class performance and security
• Intelligent Edge feature set with L2-L4
• Scalable 10/100/1000 & 10/100 PoE connectivity
• Unified core-to-edge ProVision software

Product Views:
 

Features:
 

Management:

• Remote Intelligent Mirroring: mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote 8200zl/6200yl/5400zl/3500yl switch anywhere on the network
• RMON, XRMON, and sFlow v5: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automated device discovery protocol for easy mapping by network management applications
• Uni-Directional Link Detection (UDLD): monitors cable between two switches and shuts down the ports on both ends if the cable is broken turning the bi-directional link into uni-directional; this prevents network problems such as loops
• Management simplicity: ProCurve-common networking features and CLI implementation (common across ProCurve 8200zl/6600/6200yl/5400zl/3500 switches)
• Command authorization: leverages RADIUS to link a custom list of CLI commands to individual network administrator's login; also provides an audit trail
• Friendly port names: allow assignment of descriptive names to ports
• Dual flash images: provides independent primary and secondary OS files for backup while upgrading
• Multiple configuration files: multiple configuration files can be stored to the flash image

Connectivity:

• IPv6: NEW!
  • IPv6 host: the switches can be managed and deployed at the edge of IPv6 networks
  • Dual stack (IPv4/IPv6): provides transition mechanism from IPv4 to IPv6; supports connectivity for both protocols
  • MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network
  • IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic
  • IPv6 ready: the switch hardware can support IPv6 routing, tunneling, and security; these features will be available when enabled via software update in follow-on releases
     
• IEEE 802.3af Power over Ethernet: provides up to 15.4 W per port to IEEE 802.3af compliant PoE powered devices such as IP phones, wireless access points, and security cameras
• Pre-standard PoE support: detects and provides power to pre-standard PoE devices; see list of supported devices in the product FAQ at www.procurve.com
• Jumbo frames: on Gigabit and 10-Gigabit ports, allow high-performance remote backup and disaster-recovery services
• Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports

Performance:

• High-speed/capacity architecture: up to 153.6 Gbps crossbar switching fabric provides intra- and inter- module switching with up to 111.5 million pps throughput on the purpose-built ProVision ASICs
• Selectable queue configurations: increase performance by selecting the number of queues and associated memory buffering that best meet the requirements of your network applications

Resiliency and high availability:

• Virtual Router Redundancy Protocol (requires Premium License): VRRP allows groups of two routers to dynamically back each other up to create highly available routed environments
• IEEE 802.1s Multiple Spanning Tree Protocol: provides high link availability in multiple VLAN environments by allowing multiple spanning trees; encompasses IEEE 802.1D Spanning Tree Protocol and IEEE 802.1w Rapid Spanning Tree Protocol
• Server-to-switch distributed trunking: allows a server to connect to two switches with one logical trunk that consists of multiple physical connections; enables load-balancing and increases resiliency
• IEEE 802.3ad Link Aggregation Control Protocol (LACP) and ProCurve trunking: support up to 60 trunks, each with up to 8 links (ports) per trunk

Layer 2 switching:

• IEEE 802.1ad Q-in-Q (requires Premium License): increases the scalability of Ethernet network by providing a hierarchical structure; connects multiple LAN's on high-speed campus or metro network NEW!
• ProCurve switch meshing: dynamically load-balances across multiple active redundant links to increase available aggregate bandwidth
• VLAN support and tagging: supports the IEEE 802.1Q standard and 2,048 VLANs simultaneously
• IEEE 802.1v protocol VLANs: isolate select non-IPv4 protocols automatically into their own VLANs
• GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs

Layer 3 services:

• UDP helper function: UDP broadcasts can be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevent server spoofing for UDP services such as DHCP
• Loopback interface address: defines an address in RIP and OSPF that can always be reachable, improving diagnostic capability

Layer 3 routing:

• Static IP routing: provides manually configured routing
• RIP: provides RIPv1 and RIPv2 routing at media speed
• OSPF (requires Premium License): includes host-based ECMP to provide link redundancy/scalable bandwidth and NSSA

Security:

• Access control lists (ACLs): provide filtering based on the IP field, source/destination IP address/subnet, and source/destination TCP/UDP port number on a per-VLAN or per-port basis
• Multiple user authentication methods:
  • IEEE 802.1X users per port: provides authentication of multiple IEEE 802.1X users per port; prevents user “piggybacking” on another user’s IEEE 802.1X authentication
  • Web-based authentication: authenticates from Web browser for clients that do not support IEEE 802.1X supplicant; customized remediation can be processed on an external Web server
  • MAC-based authentication: client is authenticated with the RADIUS server based on client's MAC address
  • Concurrent IEEE 802.1X, Web, and MAC authentication schemes per port: switch port will accept up to 32 sessions of IEEE 802.1X, Web, and MAC authentications
     
• Virus throttling: detects traffic patterns typical of WORM-type viruses and either throttles or entirely prevents the ability of the virus to spread across the routed VLANs or bridged interfaces, without requiring external appliances
• DHCP protection: blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
• Secure management access: all access methods--CLI, GUI, or MIB--are securely encrypted through SSHv2, SSL, and/or SNMPv3
• USB Secure Autorun (requires HP ProCurve Manager Plus): deploys, diagnoses, and updates switch using USB flash drive; works with secure credential to prevent tampering
• Switch CPU protection: provides automatic protection against malicious network traffic trying to shut down the switch
• ICMP throttling: defeats ICMP denial-of-service attacks by enabling any switch port to automatically throttle ICMP traffic
• Identity-driven ACL: enables implementation of a highly granular and flexible access security policy and VLAN assignment specific to each authenticated network user
• STP BPDU port protection: blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
• Dynamic IP lockdown: works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofing
• Dynamic ARP protection: blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
• STP Root Guard: protects root bridge from malicious attack or configuration mistakes
• Detection of malicious attacks: monitors 10 types of network traffic and sends a warning when an anomaly that potentially can be caused by malicious attacks is detected
• Port security: allows access only to specified MAC addresses, which can be learned or specified by the administrator
• MAC address lockout: prevents configured particular MAC addresses from connecting to the network
• Source-port filtering: allows only specified ports to communicate with each other
• RADIUS/TACACS+: eases switch management security administration by using a password authentication server
• Secure Shell (SSHv2): encrypts all transmitted data for secure, remote command-line interface (CLI) access over IP networks
• Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
• Secure FTP: allows secure file transfer to/from the switch; protects against unwanted file downloads or unauthorized copying of switch configuration file
• Management Interface Wizard: CLI-based step-by-step configuration tool to help ensure that management interfaces such as SNMP, telnet, SSH, SSL, Web, and USB are secured to desired level NEW!
• Switch management logon security: can require either RADIUS or TACACS+ authentication for secure switch CLI logon
• Security banner: displays a customized security policy when users log in to the switch

Convergence:

• IP multicast routing (Premium License): includes PIM Sparse and Dense modes to route IP multicast traffic
• IP multicast snooping (data-driven IGMP): automatically prevents flooding of IP multicast traffic
• LLDP-MED (Media Endpoint Discovery): a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones
• RADIUS VLAN for voice: uses standard RADIUS attribute and LLDP-MED to automatically configure VLAN for IP phones
• PoE allocations: supports multiple methods (automatic, 802.3af class, LLDP-MED, or user specified) to allocate PoE power for optimal energy saving

Quality of Service (QoS):

• Advanced classifier-based QoS: classifies traffic using multiple match criteria based on L2/3/4 information; applies QoS policies such as setting priority level and rate limit to selected traffic per port or per VLAN NEW!
• Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers
• Traffic prioritization: allows real-time traffic classification into 8 priority levels mapped to 8 queues
• Bandwidth shaping:
  • Port-based rate limiting: per-port ingress/egress enforced maximum bandwidth
  • Classified-based rate limiting: use ACL to enforce maximum bandwidth for ingress traffic on each port
  • Guaranteed minimum: per-port, per-queue egress-based guaranteed minimum bandwidth
     
• Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), L3 protocol, TCP/UDP port number, source port, and DiffServ

Specifications:
 

Model	3500-24 (J9470A)	3500-24-PoE (J9471A)	3500-48 (J9472A)	3500-48-PoE (J9473A)
	(Enlarge Image)	(Enlarge Image)	(Enlarge Image)	(Enlarge Image)
Ports
	20 RJ-45 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX) Media Type: Auto-MDIX Duplex: half or full 4 dual-personality ports Each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers) 1 RS-232C DB-9 console port	20 RJ-45 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX) Media Type: Auto-MDIX Duplex: half or full 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or an open mini-GBIC slot (for use with mini-GBIC transceivers) 1 RS-232C DB-9 console port	44 RJ-45 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX) Media Type: Auto-MDIX Duplex: half or full 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or an open mini-GBIC slot (for use with mini-GBIC transceivers) 1 RS-232C DB-9 console port	44 RJ-45 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX) Media Type: Auto-MDIX Duplex: half or full 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or an open mini-GBIC slot (for use with mini-GBIC transceivers) 1 RS-232C DB-9 console port
Physical characteristics
Dimensions	15.43(d) x 17.44(w) x 1.73(h) in. (39.2 x 44.3 x 4.4 cm) (1U height)	15.43(d) x 17.44(w) x 1.73(h) in. (39.2 x 44.3 x 4.4 cm) (1U height)	16.93(d) x 17.44(w) x 1.73(h) in. (43.0 x 44.3 x 4.4 cm) (1U height)	16.93(d) x 17.44(w) x 1.73(h) in. (43.0 x 44.3 x 4.4 cm) (1U height)
Weight	11.9 lb. (5.4 kg)	13.23 lb. (6 kg)	13.45 lb. (6.1 kg)	14.99 lb. (6.8 kg)
Memory and processor
Management Module	Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM
Mounting
	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Performance
1000 Mb Latency	< 3.4 µs (LIFO 64-byte packets)
10 Mb Latency	< 2.9 µs (LIFO 64-byte packets)
Throughput	up to 8.9 million pps (64-byte packets)		up to 12.5 million pps (64-byte packets)
Routing/Switching capacity	12 Gbps		16.8 Gbps
Routing table size	10,000 entries
MAC address table size	64,000 entries
Environment
Operating temperature	32ºF to 131ºF (0ºC to 55ºC)
Operating relative humidity	15% to 95% @ 104ºF (40ºC), non-condensing
Non-operating/Storage temperature	-40ºF to 158ºF (-40ºC to 70ºC)
Non-operating/Storage relative humidity	15% to 95% @ 149ºF (65ºC), non-condensing
Altitude	up to 15000 ft. (4.6 km)
Acoustic	Power: 53.1 dB, Pressure: 42.6 dB ISO 7779, ISO 9296		Power: 55.8 dB, Pressure: 43.5 dB ISO 7779, ISO 9296
Electrical characteristics
Description	The switch automatically adjusts to any voltage between 100-127 and 200-240 volts and either 50 or 60 Hz
Maximum heat dissipation	268 BTU/hr (282.8 kJ/hr)	435 BTU/hr (458.92 kJ/hr)	465 BTU/hr (490.58 kJ/hr)	611 BTU/hr (644.6 kJ/hr)
Voltage	100-127 / 200-240 VAC
Current	1.1 / 0.6 A	6.6 / 3.0 A	1.6 / 0.8 A	7.3 / 3.3 A
Idle power	68.2 W	91 W	96 W	133.2 W
Maximum power rating	78.7 W	497 W	136.2 W	548.8 W
PoE power		398 W		398 W
Frequency	50 / 60 Hz	50 / 60 Hz	50 / 60 Hz	50 / 60 Hz
Notes	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
Safety
	CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
Emissions
	FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
Immunity
EN	EN 55024, CISPR 24
ESD	IEC 61000-4-2; 4 kV CD, 8 kV AD
Radiated	IEC 61000-4-3; 3 V/m
EFT/Burst	IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
Surge	IEC 61000-4-5; 1 kV/2 kV AC
Conducted	IEC 61000-4-6; 3 V
Power frequency magnetic field	IEC 61000-4-8; 1 A/m, 50 or 60 Hz
Voltage dips and interruptions	IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods
Harmonics	EN 61000-3-2, IEC 61000-3-2
Flicker	EN 61000-3-3, IEC 61000-3-3
Management
	ProCurve Manager Plus; ProCurve Manager (included); command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C)
Notes
	When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.

Accessories:
 

ProCurve Gigabit-SX-LC Mini-GBIC (J4858C)
A small form factor pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550 m on multimode fiber.	Ports 1 LC 1000Base-SX port (IEEE 802.3z Type 1000Base-SX) Duplex: full only Physical characteristics Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm) Weight: 0.04 lb. (0.02 kg) Cabling Type: 62.5/125 μm or 50/125 μm (core/cladding) diameter, graded-index,	low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively Maximum distance: 220 m (62.5 μm core diameter, 160 MHz/km bandwidth) 275 m (62.5 μm core diameter, 200 MHz/km bandwidth) 500 m (50 μm core diameter, 400 MHz/km bandwidth) 550 m (50 μm core diameter, 500 MHz/km bandwidth
ProCurve Gigabit-LX-LC Mini-GBIC (J4859C)
A small form factor pluggable (SFP) Gigabit LX transceiver that provides a full-duplex Gigabit solution up to 10 km (singlemode) or 550 m (multimode).	Ports 1 LC 1000Base-LX port (IEEE 802.3z Type 1000Base-LX) Duplex: full only Physical characteristics Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm) Weight: 0.04 lb. (0.02 kg) Cabling Type: Either single mode or multimode 62.5/125 μm or 50/125 μm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC	793-2 Type A1b or A1a, respectively Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1 Maximum distance: 10 km (single mode) or 550 m (multimode) Notes A mode conditioning patch cord may be needed in some multimode fiber installations.
ProCurve Gigabit-LH-LC Mini-GBIC (J4860C)
A small form factor pluggable (SFP) Gigabit LH transceiver that provides a full-duplex Gigabit solution up to 70 km on singlemode fiber.	Ports 1 LC 1000Base-LH port (no IEEE standard exists for 1550 nm optics) Duplex: full only Physical characteristics Dimensions: 2.17(d) x 0.60(w) x 0.46(h) in. (5.5 x 1.53 x 1.18 cm) Weight: 0.04 lb. (0.02 kg) p>	Cabling Type: Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1 Maximum distance: 70 km
ProCurve 1000-BX-D SFP-LC Mini-GBIC (J9142B)
A small form-factor pluggable (SFP) Gigabit-BX (bi-directional) "downstream" transceiver that provides a full-duplex gigabit solution up to 10 km on one strand of singlemode fiber.	Ports 1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D) Duplex: full only Physical characteristics Dimensions: 2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18 cm) Environment Operating temperature: 32ºF to 158ºF (0ºC to 70ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC)	Cabling Type: Single-mode fiber optic, complying with ITU-T G.652 Maximum distance: 0.5-10,000 m (single-mode fiber) Notes For supported platforms and minimum software requirements to support this product
ProCurve 1000-BX-U SFP-LC Mini-GBIC (J9143B)
A small form-factor pluggable (SFP) Gigabit-BX (bi-directional) "upstream" transceiver that provides a full-duplex gigabit solution up to 10 km on one strand of singlemode fiber.	Ports 1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U) Duplex: full only Physical characteristics Dimensions: 2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18 cm) Environment Operating temperature: 32ºF to 158ºF (0ºC to 70ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC)	Cabling Type: Single-mode fiber optic, complying with ITU-T G.652 Maximum distance: 0.5-10,000 m (single-mode fiber) Notes For supported platforms and minimum software requirements to support this product
ProCurve 100-FX SFP-LC Transceiver (J9054B)
A small form-factor pluggable (SFP) 100Base-FX transceiver that provides 100 Mbps full-duplex connectivity up to 2 km on multimode fiber.	Ports 1 LC 100Base-FX port (IEEE 802.3u Type 100Base-FX) Duplex: half or full Physical characteristics Dimensions: 2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x 1.22 cm) Weight: 0.06 lb. (0.03 kg) Environment Operating temperature: 32ºF to 158ºF (0ºC to 70ºC) Operating relative humidity: 5% to 95% Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 5% to 85% Altitude: up to 10000 ft. (3 km)	Cabling Type: • 62.5/125 μm or 50/125 μm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively Maximum distance:  • 2 km (full duplex) or 412 m (half duplex)
ProCurve 100-BX-D SFP-LC Transceiver (J9099B)
A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "downstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber.	Ports 1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-D) Duplex: full only Physical characteristics Dimensions: 2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22 cm) Environment Operating temperature: 32ºF to 158ºF (0ºC to 70ºC) Operating relative humidity:0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Cabling Type: • Single-mode fiber optic, complying with ITU-T G.652	Maximum distance:  • 0.5-10,000 m (single-mode fiber) Notes: For supported platforms and minimum software requirements to support this product, see the document titled “Support for the HP ProCurve BX Transceivers” on the “ProCurve Mini-GBICs and SFPs” Manuals Web page. The J9099B connects to the J9100B “upstream” transceiver, or to any IEEE-standard 100BASE-BX10-U (“upstream”) device. (A 100-BX-D transceiver can only connect to a 100-BX-U product. You cannot connect two 100-BX-D transceivers together.) Transmit wavelength: 1550 nm. Receive wavelength: 1310 nm.
ProCurve 100-BX-U SFP-LC Transceiver (J9100B)
A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "upstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber.	Ports 1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-U) Duplex: full only Physical characteristics Dimensions: 2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22 cm) Environment Operating temperature: 32ºF to 158ºF (0ºC to 70ºC) Operating relative humidity:0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Cabling Type: • Single-mode fiber optic, complying with ITU-T G.652	Maximum distance:  • 0.5-10,000 m (single-mode fiber) Notes: For supported platforms and minimum software requirements to support this product, see the document titled “Support for the HP ProCurve BX Transceivers” on the “ProCurve Mini-GBICs and SFPs” Manuals Web page. The J9100B connects to the J9099B “downstream” transceiver, or to any IEEE-standard 100BASE-BX10- D (“downstream”) device. (A 100-BX-U transceiver can only connect to a 100-BX-D product. You cannot connect two 100-BX-U transceivers together.) Transmit wavelength: 1310 nm. Receive wavelength: 1550 nm.
ProCurve 10-GbE X2-SC SR Optic (J8436A)
An X2 form-factor transceiver that supports the 10-Gigabit SR standard, providing 10-Gigabit connectivity up to 300 meters on multimode fiber.	Ports 1 SC 10-GbE port (IEEE 802.3ae Type 10Gbase-SR) Duplex: full only Physical characteristics Dimensions: 3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x 1.09 cm) Weight: 0.64 lb. (0.29 kg) Environment Operating temperature: 32ºF to 104ºF (0ºC to 40ºC) Operating relative humidity: 15% to 95%, non-condensing Cabling Type: • 62.5/125 μm or 50/125 μm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC	793-2 Type A1b or A1a, respectively Maximum distance: • 62.5 μm multimode cable @ 160 MHz*km = 2-26 meters • 62.5 μm multimode cable @ 200 MHz*km = 2-33 meters • 50 μm multimode cable @ 400 MHz*km = 2-66 meters • 50 μm multimode cable @ 500 MHz*km = 2-82 meters • 50 μm multimode cable @ 2000 MHz*km = 2-300 meters Notes 850 nm serial optics For fiber patch cords, use UPC (Ultra Physical Contact) surface termination/polish. APC (Angled Physical Contact) is not recommended.
ProCurve 10-GbE X2-SC LR Optic (J8437A)
An X2 form-factor transceiver that supports the 10-Gigabit LR standard, providing 10-Gigabit connectivity up to 10 km on singlemode fiber.	Ports 1 SC 10-GbE port (IEEE 802.3ae Type 10Gbase-LR) Duplex: full only Physical characteristics Dimensions: 3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x 1.09 cm) Weight: 0.16 lb. (0.07 kg) Environment Operating temperature: 32ºF to 104ºF (0ºC to 40ºC) Operating relative humidity: 15% to 95%, non-condensing Cabling Type: • Low metal content, single-mode fiber-optic, complying with ITU-T G.652	and ISO/IEC 793-2 Type B1 Maximum distance: • 9/125 μm single-mode cable = 2 m-10 km Notes 1310 nm serial optics Conditioning patch cord cables are not supported For fiber patch cords, use UPC (Ultra Physical Contact) surface termination/polish. APC (Angled Physical Contact) is not recommended.
ProCurve 10-GbE X2-SC ER Optic (J8438A)
An X2 form-factor transceiver that supports the 10-Gigabit ER standard, providing 10-Gigabit connectivity up to 30 km on singlemode fiber (40 km on engineered links).	Ports 1 SC 10-GbE port (IEEE 802.3ae Type 10Gbase-ER) Duplex: full only Physical characteristics Dimensions: 3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x 1.09 cm) Weight: 0.15 lb. (0.07 kg) Environment Operating temperature: 32ºF to 104ºF (0ºC to 40ºC) Operating relative humidity: 15% to 95%, non-condensing Cabling Type: • Low metal content, single-mode	fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1 Maximum distance: • 30 km (40 km on engineered links) Notes 1550 nm serial optics Conditioning patch cord cables are not supported For fiber patch cords, use UPC (Ultra Physical Contact) surface termination/polish. APC (Angled Physical Contact) is not recommended.
PProCurve 10-GbE X2-CX4 Transceiver (J8440B)
An X2 form-factor transceiver with a CX4 connector that provides 10-Gigabit connectivity up to 15 meters over CX4 (copper) cable.	Ports 1 CX4 transceiver port Physical characteristics Dimensions: 3.54(d) x 1.42(w) x 0.53(h) in. (8.99 x 3.61 x 1.35 cm) Weight: 0.18 lb. (0.08 kg) Environment Operating temperature: 32ºF to 131ºF (0ºC to 55ºC) Operating relative humidity: 15% to 95% @ 149ºF (65ºC), non-condensing Maximum distance: • 15 m using CX4 cables • 300 m using	optical media converters and multimode fiber cable Notes Connector: CX4; Duplex: full Use CX4 10-GbE cable (0.5-15 m) or ProCurve 10-GbE CX4 Media Converter (J8439A).

Please refer to the 3500yl-5400zl FAQ

FAQ:

» ProCurve Networking Switch 3500yl/5400zl Series FAQ

» ProCurve 620 Redundant and External Power Supply FAQ

» ProCurve 10-GbE Transceivers FAQ

» ProCurve Mini-GBICs and SFPs FAQ

Documentation:

Download the ProCurve Switch 3500yl/3500 series Datasheet (PDF).