ProCurve Secure Router 7000dl Series
Simple, secure Wide Area Network (WAN) enabling edge-to-edge connectivity

ProCurve Secure Router 7000dl Overview:

The HP ProCurve Secure Router 7000dl Series provides an affordable and scalable platform for small and medium businesses as well as medium and large enterprise organizations to connect branch offices to their headquarter locations. The Secure Router 7000dl Series offers a variety of WAN interface modules and supports wire-speed routing performance with integrated security and convergence capabilities to secure branch office connections edge to edge while simplifying the deployment, management, and support of routers.

• Software update! Enhanced security features including policy-based routing and global password encryption
• Accessory modules for increased capabilities
• Simplified installation and configuration with external Flash memory drive
• Low cost of ownership supported by an industry-leading lifetime warranty
• Ideal for WAN environments requiring secure branch office connectivity

Features:
 

Security:

• Stateful firewall: includes an integrated stateful firewall and a Cyber Attack Defense Engine that stops common attacks to help ensure continuous availability of critical Internet-dependent applications; the firewall also supports NAT and port-forwarding operations
• Access control lists (ACLs): provide IP Layer 3 filtering based on source/destination IP address/subnet and source/destination TCP/UDP port number
• IPSec VPN: optional IPSec VPN module enables site-to-site and client sessions; tunneling protocols include IPSec and GRE; encryption methods include 3DES-CBC, DES-CBC, AES-CBC, 128-bit, 192-bit, and 256-bit; hash algorithms supported are SHA-1, MD5, and manual IPSec policies; supports the ability to route traffic between tunnels (hub and spoke VPNs)
• HTTP Content Filtering: HTTP filtering can be applied to incoming or outgoing sessions on any IP interface to provide a proactive defense against web-based threats. Also, uses the WiSP protocol to communicate with Websense® Enterprise servers for enhanced content filtering services.
• Policy-based routing: allows the enforcement of packet policies and resource allocation down to individual end systems and end users
• Network address translation (NAT) support: provides 1:1 or 1:many NAT port translation
• Management security: utilizes SSHv2, secure copy, and SSL to encrypt all HTTP traffic, allowing secure access to the browser-based management GUI in the router; supports AAA systems, including authentication methods that utilize RADIUS servers or a local user database for operator and privileged mode passwords
• Global password encryption: provides a global command to allow encryption of all user passwords
• RADIUS authentication: user authentication is performed via RADIUS to prevent unauthorized management access
• TACACS+ AAA support: offers full authentication, authorization, and accounting (AAA) with TACACS+
• IEEE 802.1X supplicant: supports IEEE 802.1X supplicant mode, where the router transmits and receives EAP requests from the authenticator to support IEEE 802.1X-enabled environments and prevent rogue networking equipment deployments

Ease of use:

• ProCurve AutoSynch(TM) capability: automatic synchronization of the internal flash and compact flash memory to help ensure that the most recent configuration and image files are stored in both locations to facilitate remote deployment, manageability, and maintenance
• ProCurve SafeMode(TM) capability: allows easy recovery of configuration mishaps when modifying active configurations remotely
• Industry-standard CLI: utilizes a familiar command-line interface (CLI) to minimize training and certification costs
• Link Layer Discovery Protocol (LLDP): supported by ProCurve Manager to enable real-time mapping of Ethernet nodes connected to the router ports
• Compact flash port: facilitates remote site installation by allowing the system image and configuration file to boot from externally accessible compact flash (CF) drive; can be configured to support ProCurve AutoSynch technology to simultaneously update external CF and onboard flash with the system image and configuration file, helping to limit downtime and switchover in the event of failure
• Dual flash images: provide independent primary and secondary OS files for backup while upgrading
• Firewall and VPN wizards: the GUI provides a simplified format for configuring firewall policies and access control lists (ACLs), as well as setting up VPN tunnels; novice and expert users will find the GUI to be intuitive and easy to use
• Central management: supports SNMPv2/v3; can be centrally managed to archive and update configuration and software image files and secures SNMP management through addition of authentication & encryption

Convergence:

• VoIP support: supports H.323 and SIP ALGs through a firewall

Quality of Service (QoS):

• Layer 2/3/4 QoS mechanisms: support IP Precedence and DiffServ priority tagging based on IP address, IP Type of Service (ToS), L3 protocol, TCP/UDP port number, and source port
• Scheduling mechanisms: supports Weighted Fair Queuing (WFQ), FIFO, Low Latency Queuing (LLQ), and Priority Queuing (PQ)
• Class-Based Weighted Fair Queuing (CBWFQ): allows allocation of bandwidth to a particular class of traffic based on a percentage of total available bandwidth or maximum Kbps throughput
• Traffic shaping and QoS support for Ethernet ports: allow the ability to apply WFQ, LLQ, and CBWFQ mechanisms to Ethernet ports based on DiffServ Code Point settings
• Policy and shaping: supports Frame Relay Traffic Shaping (FRTS) and frame relay fragmentation (FRF.12) to help minimize insertion delay across low-speed WAN links

Resiliency and high availability:

• Equal-cost multi-path (ECMP) for BGP, OSPF, and static routes: provides the ability to load-balance traffic across multiple WAN connections
• Multilink capability: MLFR and MLPPP enable multiple T1/E1 ports to be aggregated and dynamically load-balanced across Frame Relay or PPP links
• Multi-homing BGP support: supports redundant WAN connections to multiple service providers using BGP routing protocol
• Network monitor: Provides performance testing and Layer 3 network connectivity monitoring for integrated IP interfaces and externally connected ADSL/Cable modems; can be used to initiate a demand routing backup connection based on the status of IP links
• Optional redundant power supply: provides uninterrupted power (provided by ProCurve 600 RPS/EPS)

Layer 2 switching:

• VLAN support and tagging: support complete IEEE 802.1Q (4,096 VLAN IDs)

Layer 3 routing:

• IP routing protocols: supports static routes, RIP, RIPv2, OSPF, and BGP4
• Policy-based routing: allows users to route based upon both source and destination address

Layer 3 services:

• IP multicast: supports PIM SM, IGMPv2, and multicast stub routing
• PIM Sparse mode: routes IP multicast traffic using PIM Sparse mode (PIM-SM)
• DHCP support: acts as a DHCP server, relay, or client
• SNTP Client/Server: SNTP Client: Obtain time settings from NTP server using SNTP SNTP Server: Device will respond to SNTP Client requests for time settings.

Supported WAN standards:

• ProCurve Lifetime Warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries).
• Electronic and telephone support: limited electronic and telephone support is available from HP. Refer to the HP Web site at www.procurve.com/support for details on the support provided and the period during which support is available.
• Software releases: refer to the HP Web site at www.procurve.com/support for details on the software releases provided and the period during which software releases are available.

Specifications:
 

Model	7102dl (J8752A)	7203dl (J8753A)
	(Enlarge Image)	(Enlarge Image)
Port
	2 RJ-45 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-T) Media Type: Auto-MDIX Duplex: half or full 2 dl module slots 1 Compact flash port 1 VPN encryption module slot 500 Max VPN sessions 1 RS-232C DB-9 console port	2 RJ-45 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-T) Media Type: Auto-MDIX Duplex: half or full 2 dl module slots 1 dl wide module slot 1 Compact flash port RPS option 1 VPN encryption module slot 1000 Max VPN sessions 1 RS-232C DB-9 console port
Physical characteristics
Dimensions	11.52(d) x 17.42(w) x 1.73(h) in. (29.26 x 44.25 x 4.39 cm) (1U height)	11.52(d) x 17.42(w) x 1.73(h) in. (29.26 x 44.25 x 4.39 cm) (1U height)
Weight	10.26 lb. (4.62 kg)	10.95 lb. (4.93 kg)
Memory and processor
	32 MB flash, 128 MB SDRAM	32 MB flash, 256 MB SDRAM
Mounting
	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Performance
WAN throughput	150 kpps up to 4xT1/E1 lines	210 kpps up to 8xT1/E1 lines
Environment
Operating temperature	32ºF to 122ºF (0ºC to 50ºC)
Operating relative humidity	0% to 95%, non-condensing
Non-operating/Storage temperature	-4ºF to 158ºF (-20ºC to 70ºC)
Non-operating/Storage relative humidity	0% to 95%, non-condensing
Electrical characteristics
Voltage	100-127 / 200-240 VAC	100-127 / 200-240 VAC
Current	0.4 / 0.2 A	0.4 / 0.2 A
Power consumption	15 W	50 W
Frequency	50 / 60 Hz	50 / 60 Hz
Notes	Maximum power rating is the worst-case theoretical maximum power number with fully loaded PoE, 100% traffic, all ports plugged in, and all modules populated.
Safety
	CSA 22.2 No. 60950 3rd edition CE Labeled cUL Certified EN 60950/IEC 60950, 3rd edition UL Listed AS/NZS 60950 KN 60950 GOST R MEK60950 TS 60950 UL 60950	CSA 22.2 No. 60950 3rd edition CE Labeled cUL Certified EN 60950/IEC 60950, 3rd edition UL Listed AS/NZS 60950 KN 60950 GOST R MEK60950 TS 60950 UL 60950
Emissions
	FCC Rules Part 15, Subpart B Class A; CISPR 22/A2; EN 55022/A2; ICES-003; VCCI V-3/2000.04; IEC/EN 61000-3-2; IEC/EN 61000-3-3; EN 55024/A1; IEC 61000:4-2, 4-3, 4-4, 4-5, 4-6, 4-8, 4-11; BSMI CNS 13438
Telecom
	TBR-1; TBR-2; TBR-3; TBR-12; TBR-13; TBR-21; ITU-T G.992.1

Accessories:

ProCurve Secure Router 7100/7200 IPSec VPN Module (J8471A)
ProCurve Secure Router 7100/7200 IPSec VPN Module for 7100dl and 7200dl series routers enables IPSec capabilities in software and includes hardware acceleration to support the termination of up to 1000 VPN tunnels.	Physical characteristics Dimensions: 3.12(d) x 3.1(w) x 1.26(h) in. (7.92 x 7.87 x 3.2 cm) Weight: 0.27 lb. (0.12 kg) Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing	Notes Terminates IPSec VPN site-to-site and client sessions; Encryption: DES, 3DES, AES; Includes a free 10-user ProCurve VPN client license by registering on www.my.procurve.com
ProCurve Secure Router 7100/7200 IPSec VPN Base Module (J9026A)
ProCurve Secure Router 7100/7200 IPSec VPN Base encryption module for 7100dl and 7200dl series routers enables IPSec capabilities in software and allows the termination of up to 10 VPN tunnels.	Physical characteristics Dimensions: 3.12(d) x 3.1(w) x 1.26(h) in. (7.92 x 7.87 x 3.2 cm) Weight: 0.27 lb. (0.12 kg) Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing	Notes Includes a free 10-user ProCurve VPN client license by registering on www.my.procurve.com
ProCurve Secure Router dl 1xT1 Module (J8451A)
1-port T1/FrT1 dl module with integrated CSU/DSU. Includes 1 RJ48-RJ48 Telco straight-through cable (5 m).	Connectivity Connector: (T1) RJ-48C, 1 RJ-45 for optional backup module T1: 1.544 Mbps (24x64 kbps) for each T1 interface FrT1: DS0 channelized (Nx64 kbps) Line code: AMI, B8ZS Line build out: 0, -7.5, -15, -22.5 dB Input signal: 0 to -36 dB (DS1) Physical characteristics Dimensions: 4.65(d) x 3.2(w) x 1.3(h) in. (11.81 x 8.13 x 3.3 cm) Weight: 0.13 lb. (0.06 kg)	Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing
ProCurve Secure Router dl 1xT1 + DSX-1 Module (J8452A)
1-port T1 dl module with integrated CSU/DSU and DSX-1 TDM interface to connect to a PBX for voice service. Includes 2 RJ48-RJ48 Telco straight-through cables (5 m).	Connectivity Connector: (T1) RJ-48C, 1 RJ-45 for optional backup module T1: 1.544 Mbps (24x64 kbps) for each T1 interface FrT1: DS0 channelized (Nx64 kbps) Line code: AMI, B8ZS Line build out: 0, -7.5, -15, -22.5 dB Input signal: 0 to -36 dB (DS1) Physical characteristics Dimensions: 4.65(d) x 3.2(w) x 1.3(h) in. (11.81 x 8.13 x 3.3 cm) Weight: 0.13 lb. (0.06 kg)	Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing
ProCurve Secure Router dl 2xT1 Module (J8453A)
2-port T1/FrT1 dl module with integrated CSU/DSU. Includes 2 RJ48-RJ48 Telco straight-through cables (5 m).	Connectivity Connector: (2xT1) RJ-48C, 1 RJ-45 for optional backup module T1: 1.544 Mbps (24x64 kbps) for each T1 interface FrT1: DS0 channelized (Nx64 kbps) Line code: AMI, B8ZS Line build out: 0, -7.5, -15, -22.5 dB Input signal: 0 to -36 dB (DS1) Physical characteristics Dimensions: 4.65(d) x 3.2(w) x 1.3(h) in. (11.81 x 8.13 x 3.3 cm) Weight: 0.13 lb. (0.06 kg)	Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing
ProCurve Secure Router dl 1xE1 Module (J8454A)
1-port E1/FrE1 dl module with integrated CSU/DSU. Includes 1 RJ48-RJ48 Telco straight-through cable (5 m).	Connectivity Connector: (E1) RJ-48C,1 RJ-45 for optional backup module T1: 2.048 Mbps (Nx64 kbps) FrE1: DS0 channelized (Nx56/64 kbps) Line code: HDB3, AMI Framing: FAS with optional CRC-4 Receiver sensitivity: -30 dB Physical characteristics Dimensions: 4.65(d) x 3.2(w) x 1.3(h) in. (11.81 x 8.13 x 3.3 cm) Weight: 0.13 lb. (0.06 kg)	Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing
ProCurve Secure Router dl 1xE1+G.703 Module (J8455A)
1-port E1/FrE1 dl module with integrated CSU/DSU and G.703 TDM interface to connect to a PBX for voice service. Includes 2 RJ48-RJ48 Telco straight-through cables (5 m).	Connectivity Connector: (E1) RJ-48C,(G.703) RJ-48C,1 RJ-45 for optional backup module T1: 2.048 Mbps (30x64 kbps) FrE1: DS0 channelized (Nx56/64 kbps) Line code: HDB3, AMI Framing: FAS with optional CRC-4 Receiver sensitivity: -30 dB Physical characteristics Dimensions: 4.65(d) x 3.2(w) x 1.3(h) in. (11.81 x 8.13 x 3.3 cm) Weight: 0.16 lb. (0.07 kg)	Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing
ProCurve Secure Router dl 2xE1 Module (J8456A)
2-port E1/FrE1 dl module with integrated CSU/DSU. Includes 2 RJ48-RJ48 Telco straight-through cables (5 m).	Connectivity Connector: (2xE1) RJ-48C,1 RJ-45 for optional backup module T1: 2.048 Mbps (30x64 kbps) FrE1: DS0 channelized (Nx56/64 kbps) Line code: HDB3, AMI Framing: FAS with optional CRC-4 Receiver sensitivity: -30 dB Physical characteristics Dimensions: 4.65(d) x 3.2(w) x 1.3(h) in. (11.81 x 8.13 x 3.3 cm) Weight: 0.13 lb. (0.06 kg)	Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing
ProCurve Secure Router dl 1-Port ADSL2+ Annex B Module (J8759A)
1-port ADSL2+ Annex B dl Module supports ADSL/ADSL2/ADSL2+ over ISDN lines	Connectivity Connector: (ADSL) RJ-11,1 RJ-45 for optional backup module Supported standard: ADSL, ADSL2, ADSL2+ for Annex B over ISDN lines Min/Max upstream rate: ADSL: 32 kbps to 800 kbps ADSL2: 32 kbps to 800 kbps ADSL2+: 32 kbps to 2 Mbps Min/Max downstream rate: ADSL: 224 kbps to 8 Mbps ADSL2: 224 kbps to 12 Mbps ADSL2+: 224 kbps to 24 Mbps Line code: DMT Physical characteristics Dimensions: 4.65(d) x 3.2(w) x 1.3(h) in. (11.81 x 8.13 x 3.3 cm) Weight: 0.18 lb. (0.08 kg)	Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing
ProCurve Secure Router dl 1-Port ADSL2+ Annex A Module (J8459A)
1-port ADSL2+ Annex A dl Module supports ADSL/ADSL2/ADSL2+ over POTS lines	Connectivity Connector: (ADSL) RJ-11,1 RJ-45 for optional backup module Supported standard: ADSL, ADSL2, ADSL2+ for Annex A over POTS lines Min/Max upstream rate: ADSL: 32 kbps to 800 kbps ADSL2: 32 kbps to 800 kbps ADSL2+: 32 kbps to 2 Mbps Min/Max downstream rate: ADSL: 224 kbps to 8 Mbps ADSL2: 224 kbps to 12 Mbps ADSL2+: 224 kbps to 24 Mbps Line code: DMT Physical characteristics Dimensions: 4.65(d) x 3.2(w) x 1.3(h) in. (11.81 x 8.13 x 3.3 cm) Weight: 0.18 lb. (0.08 kg)	Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing
ProCurve Secure Router dl 1-Port Serial Module (J8458A)
1-port serial dl module supporting up to 10 Mbps over V.35/X.21 DTE interfaces to an external CSU/DSU. Requires a V.35 or X.21 serial cable to connect to an external CSU/DSU. Serial interface operates in DTE mode only.	Connectivity Connector: (Serial) 26-pin interface, 1 RJ-45 for optional backup module Bit rate: Up to 10 Mbps to an external CSU/DSU Interface: V.35 or X.21 interface support Physical characteristics Dimensions: 4.65(d) x 3.2(w) x 1.3(h) in. (11.81 x 8.13 x 3.3 cm) Weight: 0.11 lb. (0.05 kg)	Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing
ProCurve Secure Router dl 2-Port ISDN BRI U Module (J9010A)
2-port ISDN BRI U module. Includes 2 RJ11-RJ45 straight-through cables (3 m).	Connectivity Connector: RJ-45, 1 RJ-45 for optional backup module Interface: 2 ISDN BRI U interfaces, each supporting 2 B channels (128 kbps) Physical characteristics Dimensions: 4.44(d) x 3.20(w) x 1.29(h) in. (11.28 x 8.13 x 3.28 cm) Weight: 0.21 lb. (0.1 kg)	Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing
ProCurve Secure Router dl 2-Port ISDN BRI S/T Module (J8457A)
2-port ISDN BRI S/T module. Includes 2 RJ45-RJ45 straight-through cables (3 m).	Connectivity Connector: RJ-45, 1 RJ-45 for optional backup module Interface: 2 ISDN BRI S/T interfaces, each supporting 2 B channels (128 kbps) Physical characteristics Dimensions: 4.44(d) x 3.20(w) x 1.29(h) in. (11.28 x 8.13 x 3.28 cm) Weight: 0.21 lb. (0.1 kg)	Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing
ProCurve Secure Router dl Analog Modem Backup Module (J8462A)
1-port v.90 analog modem module attaches as a daughter card to dl modules to provide backup capability. Users can also initiate an out-of-band console session through the modem interface.	Physical characteristics Dimensions: 3.75(d) x 2.5(w) x 0.73(h) in. (9.53 x 6.35 x 1.85 cm) Weight: 0.36 lb. (0.16 kg) Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing	Notes Supports speeds from 300 bps to 33.6 kbps.
ProCurve Secure Router dl 1-Port ISDN BRI S/T Backup Module (J8461A)
1-port ISDN BRI S/T module attaches as a daughter card to dl modules to provide backup capability. Includes 1 RJ11-RJ45 straight-through cable (3 m).	Connectivity Connector: RJ-45 Interface: S/T interface support; support for 1 B channel (64 kbps) Physical characteristics Dimensions: 3.75(d) x 2.5(w) x 0.73(h) in. (9.53 x 6.35 x 1.85 cm) Weight: 0.4 lb. (0.18 kg)	Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing
ProCurve Secure Router dl 1-Port ISDN BRI U Backup Module (J8460A)
1-port ISDN BRI U module attaches as a daughter card to dl modules to provide backup capability. Includes 1 RJ11-RJ45 straight-through cable (3 m).	Connectivity Connector: RJ-45 Interface: U interface support; support for 1 B channel (64 kbps) Physical characteristics Dimensions: 3.75(d) x 2.5(w) x 0.73(h) in. (9.53 x 6.35 x 1.85 cm) Weight: 0.4 lb. (0.18 kg)	Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing
ProCurve Secure Router dl Wide 8xT1/E1 Module (J8463A)
8-port T1/FrT1/ChT1/E1/FrE1/ChE1 dl wide module can support either T1 or E1 functionality via onboard dipswitch setting. Includes 8 RJ48-RJ48 Telco straight-through cables (5 m)	Connectivity Connector: (8xT1/E1) RJ-48C T1: 1.544 Mbps (24x64 kbps) for each T1 E1: 2.048 Mbps (30x64 kbps) for each E1 FrT1/E1: DS0 channelized (Nx64 kbps) ChT1: terminates up to 24 independent 64 kbps ChE1: terminates up to 30 independent 64 kbps Line code: T1: AMI, T1: B8ZS, E1: HDB3 Physical characteristics Dimensions: 6.0(d) x 8.64(w) x 0.94(h) in. (15.24 x 21.95 x 2.39 cm) Weight: 2.93 lb. (1.32 kg)	Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing Notes Supports channelized T1/E1 allowing up to 24 or 30 64 kbps independent connections terminating on a single T1 or E1 WAN port.
ProCurve Secure Router dl Wide 8xSerial Module (J9011A)
8-port serial dl wide module supporting up to 2 Mbps per port over V.35/X.21 interfaces to an external CSU/DSU.	Connectivity Connector: (Serial) 26-pin interface Bit rate: Up to 10 Mbps per port to an external CSU/DSU Interface: V.35 or X.21 interface support Physical characteristics Dimensions: 8.75(d) x 6.0(w) x 1.0(h) in. (22.23 x 15.24 x 2.54 cm) Weight: 0.54 lb. (0.24 kg) Environment Operating temperature: 32ºF to 122ºF (0ºC to 50ºC) Operating relative humidity: 0% to 95%, non-condensing Non-operating/Storage temperature: -40ºF to 185ºF (-40ºC to 85ºC) Non-operating/Storage relative humidity: 0% to 95%, non-condensing	Notes Requires the number of V.35 or X.21 serial cables needed to connect and use at the customer premises with an external CSU/DSU. Serial interfaces operate in DTE mode only. There is no internal clock.

FAQ:

» Secure Router 7000dl Series FAQ

Documentation:

Download the ProCurve Secure Router 7000dl Datasheet (PDF).