HP E-802.11n Access Point Series

Overview:

HP offers intelligent IEEE 802.11n wireless access points, ranging from our single-radio IEEE 802.11a/b/g/n to our dual 802.11 a/b/g/n access points. The E-series MSM access points are advanced wireless devices that provide consistent, easy-to-manage connectivity that expands your existing network. The access points maintain your network without interruption and reduce bottlenecks and network complexity by determining where data needs to go throughout the network. The E-series MSM access points provide complete wireless coverage for greater reliability and connectivity. The HP IEEE 802.11n-capable RF Security sensor brings security to the network edge by providing scalable 24 x 7 IDS/IPS capabilities that prevent security breaches on IEEE 802.11a/b/g and 802.11n wireless networks. The E-series MSM access points and RF Security sensor require a single Power over Ethernet (PoE)-cable drop, and are IEEE 802.3af compliant and support a plug-and-play automatic configuration.

• Single and dual radio
• IEEE 802.11 a/b/g/n access points
• Increased network speed and capacity
• Protection against rogue 802.11a/b/g/n AP/client
• Indoor enclosure

HP E-802.11n Access Point Series Models:

	E-MSM410 Access Point US (J9426B)
	E-MSM422 Access Point US (J9358B)

Features and Benefits:

Quality of Service (QoS)

• IEEE 802.1p prioritization — delivers data to devices based on the priority and type of traffic
• SpectraLink voice priority (SVP) support — prioritizes SpectraLink voice IP packets sent from a SpectraLink NetLink SVP server to SpectraLink wireless voice handsets to help ensure excellent voice quality
• Wireless —
  • L2/L3/L4 classification: IEEE 802.1p VLAN priority, SpectraLink SVP and DiffServ
  • Wi-Fi MultiMedia (WMM), IEEE 802.11e EDCF, and Service-Aware priority assigned by VSC
  • Maximum VoIP call capacity: 12 active calls on IEEE 802.11 a/b/g/n
• Network management —
  • Fully manageable using HP Manager and HP Mobility Manager
  • SNMP v2c, SNMP v3, MIB-II with Traps, and RADIUS Authentication Client MIB (RFC 2618)
  • Embedded HTML management tool with secure access (SSL and VPN)
  • Scheduled configuration and firmware upgrades from central server
• Diagnostic —
  • Client event log records association, authentication, and DHCP events
  • Packet capture tool for Ethernet and IEEE 802.11 interfaces (PCAP format)
  • Data rate matrix

Intrusion detection/prevention system (IDS/IPS)

• Protection against rogue IEEE 802.11a/b/g/n access points and wireless clients — HP E-MSM415 RF Security Sensors continuously scan for detection, classification, and prevention of wireless threats on IEEE 802.11a/b/g and 802.11n wireless networks
• Provides 24 x 7 detection, classification, and prevention capabilities — HP E-MSM415 RF Security Sensors are able to continuously provide detection, classification, and prevention capabilities, even when the connectivity to the HP RF Manager IDS/IPS Controller is lost. The HP E-MSM415 Security Sensor supports both A and E Series WLAN deployments.
• Signature-based detection — detects attacks that have known attack patterns; IPS maintains a signature database that contains the pattern definitions for known attacks that can be automatically updated using a subscription service
• Protocol anomaly-based detection — detects attacks that use anomalies in application protocol payloads

Connectivity

• Auto-MDIX — automatically adjusts for straight-through or crossover cables on all 10/100 ports
• IEEE 802.3af Power over Ethernet (PoE) support — simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location

Mobility

• Anywhere, anytime wireless coverage —
  • Single- and dual-radio IEEE 802.11a/b/g and 802.11n access points
  • Per-radio software-selectable configuration of frequency bands
  • Self-healing, self-optimizing local mesh extends network availability
  • Wi-Fi Alliance Certified for interoperability with all IEEE 802.11a/b/g/n client devices
  • IEEE 802.3af PoE or external power cord on selected models
• Interoperability — Wi-Fi Alliance certifications, including IEEE 802.11g Wi-Fi and WPA2 to help ensure multivendor interoperability
• Virtual Service Communities (VSCs) —
  • Up to 16 SSIDs, each with unique MAC address, configurable SSID broadcasts
  • Individual security and QoS profiles per VSC
  • Configurable DTIM and minimum data rate per VSC
  • Each VSC can be mapped to separate IEEE 802.1Q VLANs
  • WMM and/or WMM-PS
  • Security filter
  • IP filter
• AP client access control functions —
  • IEEE 802.1X authentication using EAP-SIM, EAP-FAST, EAP-TLS, EAP-TTLS, and PEAP
  • MAC address authentication using local or RADIUS access lists
  • RADIUS AAA using EAP-MD5, PAP, CHAP, and MS-CHAPv2
  • RADIUS Client (RFC 2865 and 2866) with location-aware support
  • Layer 2 wireless client isolation
• Auto Channel Select (ACS) — helps reduce radio co-channel interference by automatically selecting an unoccupied radio channel

• Choice of IEEE 802.11i, Wi-Fi Protected Access 2 (WPA2), or WPA — locks out unauthorized wireless access by authenticating users prior to granting network access; robust Advanced Encryption Standard (AES) or Temporal Key Integrity Protocol (TKIP) encryption secures the data integrity of wireless traffic
• Local wireless bridge client traffic filtering — when enabled, prevents communication between wireless devices associated with the same access point
• IEEE 802.1X — provides port-based user authentication with support for Extensible Authentication Protocol (EAP) MD5, TLS, TTLS, and PEAP with choice of AES, TKIP, and static or dynamic WEP encryption for protecting wireless traffic between authenticated clients and the access point

Warranty and support

• Lifetime Warranty — for as long as you own the product, with next-business-day advance replacement (available in most countries)
• Electronic and telephone support — limited electronic and telephone support is available from HP; refer to www.hp.com/networking/warranty for details on the support provided and the period during which support is available
• Software releases — refer to www.hp.com/networking/warranty for details on the software releases provided and the period during which software releases are available for your product(s)

Specifications:

	E-MSM410 Access Point (J9426B)	E-MSM422 Access Point (J9358B)
Port
	1 RJ-45 autosensing 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 1 RJ-45 serial console port	1 RJ-45 autosensing 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 1 RS-232C DB-9 console port
AP characteristics
Radios	Single (a/b/g/n)	Dual (a/b/g + a/b/g/n)
Radio operation modes	Client access, Local mesh, Packet capture	Client access, Local mesh, Packet capture
AP operation modes	Autonomous and controlled	Autonomous and controlled
Wi-Fi Alliance Certification	a/b/g/n Wi-Fi Certified	a/b/g/n Wi-Fi Certified
Physical characteristics
Dimensions	6.16(d) x 5.19(w) x 1.94(h) in. (15.64 x 13.17 x 4.94 cm)	6.7(d) x 8.8(w) x 2.6(h) in. (17.02 x 22.35 x 6.6 cm)
Weight	0.72 lb. (0.33 kg) mounting bracket	3.97 lb. (1.8 kg) mounting bracket
Enclosure	Indoor, plenum rated	Indoor, plenum rated
Mounting
	Includes two Mounting Clips	Includes two Mounting Clips
Environment
Operating temperature	32°F to 122°F (0°C to 50°C)	32°F to 122°F (0°C to 50°C)
Operating relative humidity	5% to 95%, noncondensing	5% to 95%, noncondensing
Non-Operating temperature	-40°F to 158°F (-40°C to 70°C)	-40°F to 158°F (-40°C to 70°C)
Non-Operating relative humidity	5% to 95%, noncondensing	5% to 95%, noncondensing
Electrical characteristics
Description	IEEE 802.3af PoE compliant for Gigabit Ethernet	IEEE 802.3af PoE compliant; IEEE 802.3af PoE for Gigabit Ethernet or external power supply available as accessory.
Maximum power rating	8 W	12 W
Antenna	(3) Integrated, dual-band 2.4/5 GHz omnidirectional antennas	(3) IEEE 802.11n RP-SMA, 1 IEEE 802.11a/b/g RP-SMA
Number of internal antennas	3	6
Number of external antennas	-	4
Frequency band and operating channels
FCC	2.412 - 2.462 GHz (1 - 11 channels) 5.180 - 5.240 GHz (36 - 48 channels) 5.260 - 5.320 GHz (52 - 64 channels) 5.500 - 5.700 GHz (100 - 140 (excluding 120, 124 and 128) channels) 5.745 - 5.825 GHz (149 - 165 channels)	2.412 - 2.462 GHz (1 - 11 (for both the n radio and the a/b/g radio) channels) 5.180 - 5.240 GHz (36 - 48 (for both the n radio and the a/b/g radio) channels) 5.260 - 5.320 GHz (52 - 64 (for the n radio only) channels) 5.500 - 5.700 GHz (100- 140 (excluding 120, 124 and 128 for the n radio only) channels) 5.745 - 5.825 GHz (149 - 165 (for both the n radio and the a/b/g radio) channels)
EN	2.412 - 2.472 GHz (1 - 13 channels) 5.180 - 5.240 GHz (36 - 48 channels) 5.260 - 5.320 GHz (52 - 64 channels) 5.500 - 5.700 GHz (100 - 140 (excluding 120, 124 and 128) channels)	2.412 - 2.472 GHz (1 - 13 (for both the n radio and the a/b/g radio) channels) 5.180 - 5.240 GHz (36 - 48 (for both the n radio and the a/b/g radio) channels) 5.260 - 5.320 GHz (52 - 64 (for the n radio only) channels) 5.500 - 5.700 GHz (100 - 140 (excluding 120, 124 and 128 for the n radio only) channels)
RCR	2.412 - 2.472 GHz (1 - 13 channels) 5.180 - 5.240 GHz (36 - 48 channels) 5.260 - 5.320 GHz (52 - 64 channels) 5.500 - 5.700 GHz (100 - 140 channels)	2.412 - 2.472 GHz (1 - 13 (for both the n radio and the a/b/g radio) channels) 5.170 - 5.230 GHz (34 - 46 (for the a/b/g radio only) channels) 5.180 - 5.240 GHz (36 - 48 (for the n radio only) channels) 5.260 - 5.320 GHz (52 - 64 (for the n radio only) channels) 5.500 - 5.700 GHz (100 - 140 (for the n radio only) channels)
Radio
	FCC Part 15.247	FCC Part 15.247
Safety
	UL 2043UL 60950-1IEC 60950-1EN 60950-1CAN/CSA-C22.2 No. 60950-1	UL 2043UL 60950-1IEC 60950-1EN 60950-1CAN/CSA-C22.2 No. 60950-1
RF Exposure
	FCC Bulletin OET-65CRSS-102	FCC Bulletin OET-65CRSS-102
Features
	Single radio: IEEE 802.11n for high-throughput applications and IEEE 802.11a/b/g for legacy support : – Integrated antennas for both IEEE 802.11a/b/g (diversity) and 802.11n (3x3 MIMO) – Will operate the radio; full power on IEEE 802.3af PoE for Gigabit Ethernet	Dual radio: IEEE 802.11n for high-throughput applications and IEEE 802.11a/b/g for legacy support : Integrated antennas for both IEEE 802.11a/b/g (diversity) and 802.11n (3x3 MIMO) : Accepts external IEEE 802.11a/b/g (non-diversity) and 802.11n (3) antennas : Will operate both radios; full power on IEEE 802.3af PoE for Gigabit Ethernet :
Notes
	Maximum transmit power varies by country	Maximum transmit power varies by country

Additional Features:

(Applies to All Models in Series)

Services and Support:

HP Care Packs for HP Networking

E-MSM410 Access Point US (J9426B)

• 3-year, 4-hour onsite, 13x5 coverage for hardware (UN683E)
• 3-year, 4-hour onsite, 24x7 coverage for hardware (UN684E)
• 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UN686E)
• 3-year, 24x7 SW phone support, software updates (UN685E)
• 4-year, 4-hour onsite, 13x5 coverage for hardware (US013E)
• 4-year, 4-hour onsite, 24x7 coverage for hardware (US014E)
• 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (US015E)
• 4-year, 24x7 SW phone support, software updates (US016E)
• 5-year, 4-hour onsite, 13x5 coverage for hardware (US017E)
• 5-year, 4-hour onsite, 24x7 coverage for hardware (US018E)
• 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (US019E)
• 5-year, 24x7 SW phone support, software updates (US020E)
• 3 Yr 6 hr Call-to-Repair Onsite (UW416E)
• 4 Yr 6 hr Call-to-Repair Onsite (UW417E)
• 5 Yr 6 hr Call-to-Repair Onsite (UW418E)

E-MSM422 Access Point US (J9358B)

• 3-year, 4-hour onsite, 13x5 coverage for hardware (UN667E)
• 3-year, 4-hour onsite, 24x7 coverage for hardware (UN668E)
• 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UN670E)
• 3-year, 24x7 SW phone support, software updates (UN669E)
• 4-year, 4-hour onsite, 13x5 coverage for hardware (UR980E)
• 4-year, 4-hour onsite, 24x7 coverage for hardware (UR981E)
• 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR982E)
• 4-year, 24x7 SW phone support, software updates (UR983E)
• 5-year, 4-hour onsite, 13x5 coverage for hardware (UR984E)
• 5-year, 4-hour onsite, 24x7 coverage for hardware (UR985E)
• 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR986E)
• 5-year, 24x7 SW phone support, software updates (UR987E)
• 3 Yr 6 hr Call-to-Repair Onsite (UW404E)
• 4 Yr 6 hr Call-to-Repair Onsite (UW405E)
• 5 Yr 6 hr Call-to-Repair Onsite (UW406E)

HP Networking Services

Services that add value to your business
The warranties on HP Networking products provide a robust foundation for ongoing network support, but many customers have advanced support needs. Today's enterprise businesses, regardless of their size, are under increasing pressure to reduce the cost and complexity of supporting their network infrastructures. Demand for new services from businesses and their end users is constantly increasing. HP offers an affordable, comprehensive portfolio of networking services for organizations of all sizes. HP has a unique services advantage you can benefit from, and HP is the only vendor in the IT industry that can provide integrated and consistent support for your entire technology infrastructure worldwide, including networking, servers and storage, and imaging and printing, as well as desktop and mobile computing, to help you grow your business with expert support that is affordable, personal, and scaled to your needs. HP Networking's implementation and design centers simplify your network planning, while HP Technology and Enterprise Services deliver choice and flexibility.

HP provides a full range of custom services to meet the end-to-end networking needs of our customers. HP Network Lifecycle Services form the core foundation of network consulting, assessments, planning, design, integration, deployment, and management. They are available as standalone services or can be crafted to deliver solutions across the services portfolio, spanning network performance, network security and risk management, global deployment, data center networking, wireless LAN/mobility, and Unified Communications and Collaboration.

Documentation:

HP E-802.11n Access Point Series Datasheet (.PDF)