HP E2810 Switch Series

Overview:

The E2810 Switch Series consists of two switches: the 24-port HP E2810-24G Switch with 20 10/100/1000 ports, and the 48-port HP E2810-48G Switch with 44 10/100/1000 ports. Each switch also has four dual-personality ports for RJ-45 10/100/1000 or mini-GBIC fiber Gigabit connectivity. Ideal for high-performance and secure 10/100/1000 connectivity, the E2810 Switch Series offers access security and advanced prioritization and traffic-monitoring capabilities. The E2810 Switch Series is cost-effective and easy to use, with a shallow, 1U form factor that provides operational flexibility for use in smaller wiring closets.

• Managed Layer 2 feature set with 24 or 48 Gb ports
• sFlow, source port filtering, enhanced security
• Optional redundant power supply
• Four dual-personality mini-GBIC slots
• Industry-leading warranty

HP E2810 Switch Series Models:

	E2810-24G Switch (J9021A)
	E2810-48G Switch (J9022A)

Features and Benefits:

Quality of Service (QoS)

• Class of service (CoS) — sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
• Layer 4 prioritization — enables prioritization based on TCP/UDP port numbers
• Traffic prioritization (IEEE 802.1p) — allows real-time traffic classification with support for eight priority levels mapped to four queues

Connectivity

• Dual-personality functionality — four 10/100/1000 ports or SFP slots for optional fiber connectivity such as Gigabit-SX, -LX, -LH, or 100-FX

Resiliency and high availability

• IEEE 802.3ad Link Aggregation Protocol (LACP) and HP port trunking — support up to 24 trunks, each with up to 8 links (ports) per trunk
• IEEE 802.1s Multiple Spanning Tree — provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w
• Optional redundant power supply — provides uninterrupted power (provided by HP E600 RPS/EPS)

Manageability

• sFlow (RFC 3176) — wire-speed traffic accounting and monitoring
• RMON (remote monitoring) — provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
• Dual flash images — provides independent primary and secondary operating system files for backup while upgrading
• Troubleshooting — ingress/egress port monitoring enables network problem-solving
• Single IP Address Management — single IP address management for a virtual stack of up to 16 switches
• Multiple configuration files — allow multiple configuration files to be stored to flash image

Layer 2 switching

• VLAN support and tagging — supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
• GARP VLAN Registration Protocol (GVRP) — allows automatic learning and dynamic assignment of VLANs
• Jumbo packet support — supports up to 9220-byte frame size to improve performance of large data transfers

• Port security — allows access only to specified MAC addresses, which can be learned or specified by the administrator
• Protected ports — provides increased security by allowing specified ports to be isolated from all other ports on the switch; the protected port or ports can only communicate with the uplink or shared resources
• MAC address lockout — prevents particular configured MAC addresses from connecting to the network
• Multiple user authentication methods —
  • IEEE 802.1X — industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server
  • Web-based authentication — similar to IEEE 802.1X, it provides a browser-based environment to authenticate clients that do not support the IEEE 802.1X supplicant
  • MAC-based authentication — client is authenticated with the RADIUS server based on the client's MAC address
• Switch management logon security — can require either RADIUS or TACACS+ authentication for secure switch CLI logon
• Multiple IEEE 802.1X users per port — provides authentication of up to two IEEE 802.1X users per port; prevents user "piggybacking" on another user's IEEE 802.1X authentication
• STP BPDU port protection — blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
• Secure File Transfer Protocol (FTP) — allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of switch configuration file
• RADIUS/TACACS+ — eases switch management security administration by using a password authentication server
• Source-port filtering — allows only specified ports to communicate with each other
• Secure Shell (SSHv2) — encrypts all transmitted data for secure, remote command-line interface (CLI) access over IP networks
• Secure Sockets Layer (SSL) — encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch

Ease of use

• Locator LED (switch) — allows users to set the locator LED on a specific switch to either turn on, blink, or turn off; simplifies troubleshooting by making it easy to locate a particular switch within a rack of similar switches
• Friendly port names — allow assignment of descriptive names to ports
• Find-Fix-and-Inform — finds and fixes common network problems automatically, then informs administrator
• HP/IEEE Auto-MDIX — automatically adjusts for straight-through or crossover cables on all RJ-45 ports

Warranty and support

• Lifetime Warranty — for as long as you own the product, with next-business-day advance replacement (available in most countries).
• Electronic and telephone support — limited electronic and telephone support is available from HP; refer to www.hp.com/networking/warranty for details on the support provided and the period during which support is available
• Software releases — refer to www.hp.com/networking/warranty for details on the software releases provided and the period during which software releases are available for your product(s)

Specifications:

	E2810-24G (J9021A)	E2810-48G (J9022A)
Port
	20 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port or an open mini-GBIC slot (for use with mini-GBIC transceivers)	44 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port or an open mini-GBIC slot (for use with mini-GBIC transceivers)
Physical characteristics
Dimensions	12.7(d) x 17.4(w) x 1.7(h) in. (32.26 x 44.2 x 4.32 cm) (1U height)	12.7(d) x 17.4(w) x 1.7(h) in. (32.26 x 44.2 x 4.32 cm) (1U height)
Weight	7.21 lb. (3.27 kg)	8.6 lb. (3.9 kg)
Memory and processor
	MIPS @ 264 MHz, 16 MB flash, 64 MB SDRAM; packet buffer size: 0.75 MB	MIPS @ 264 MHz, 16 MB flash, 64 MB SDRAM; packet buffer size: 1.5 MB
Mounting
	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only.
Performance
Latency	< 5.6 µs (FIFO 64-byte packets)	< 5.4 µs (FIFO 64-byte packets)
Throughput	Up to 35.7 million pps	Up to 71.4 million pps
Switching capacity	48 Gbps	96 Gbps
MAC address table size	8000 entries	8000 entries
Environment
Operating temperature	32°F to 113°F (0°C to 45°C)	32°F to 113°F (0°C to 45°C)
Operating relative humidity	15% to 95% @ 104°F (40°C), noncondensing	15% to 95% @ 104°F (40°C), noncondensing
Non-Operating temperature	-40°F to 158°F (-40°C to 70°C)	-40°F to 158°F (-40°C to 70°C)
Non-Operating relative humidity	15% to 95% @ 149°F (65°C), noncondensing	15% to 95% @ 149°F (65°C), noncondensing
Altitude	up to 10,000 ft. (3 km)	up to 10,000 ft. (3 km)
Acoustic	Power: 40.3 dB	Power: 40.5 dB
Electrical characteristics
Maximum power rating	164 BTU/hr (173 kJ/hr)	341 BTU/hr (360 kJ/hr)
Voltage	100-127/200-240 VAC	100-127/200-240 VAC
Current	1.0 A	1.5 A
Maximum power rating	48 W	92 W
Frequency	50/60 Hz	50/60 Hz
Notes	Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.	Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
Safety
	cUL (CSA 22.2 No. 60950)EN 60950/IEC 60950NOM-019-SCFI-1994UL 60950	cUL (CSA 22.2 No. 60950)EN 60950/IEC 60950NOM-019-SCFI-1994UL 60950
Note
	When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.	When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.

Additional Features:

(Applies to All Switches in Series)

Services and Support:

HP Care Packs for HP Networking

HP E2810-24G Switch (J9021A)

• 3-year, 4-hour onsite, 13x5 coverage for hardware (U2855E)
• 3-year, 4-hour onsite, 24x7 coverage for hardware (U2856E)
• 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6304E)
• 3-year, 24x7 SW phone support, software updates (UE262E)
• Installation with minimum configuration, system-based pricing (U4826E)
• Installation with HP-provided configuration, system-based pricing (U4830E)
• 4-year, 4-hour onsite, 13x5 coverage for hardware (UR868E)
• 4-year, 4-hour onsite, 24x7 coverage for hardware (UR869E)
• 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR870E)
• 4-year, 24x7 SW phone support, software updates (UR871E)
• 5-year, 4-hour onsite, 13x5 coverage for hardware (UR872E)
• 5-year, 4-hour onsite, 24x7 coverage for hardware (UR873E)
• 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR874E)
• 5-year, 24x7 SW phone support, software updates (UR875E)
• 3 Yr 6 hr Call-to-Repair Onsite (UW356E)
• 4 Yr 6 hr Call-to-Repair Onsite (UW357E)
• 5 Yr 6 hr Call-to-Repair Onsite (UW358E)

HP E2810-48G Switch (J9022A)

• 3-year, 4-hour onsite, 13x5 coverage for hardware (H4496E)
• 3-year, 4-hour onsite, 24x7 coverage for hardware (H2893E)
• 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6319E)
• 3-year, 24x7 SW phone support, software updates (UE264E)
• Installation with minimum configuration, system-based pricing (U4826E)
• Installation with HP-provided configuration, system-based pricing (U4830E)
• 4-year, 4-hour onsite, 13x5 coverage for hardware (UR884E)
• 4-year, 4-hour onsite, 24x7 coverage for hardware (UR885E)
• 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR886E)
• 4-year, 24x7 SW phone support, software updates (UR887E)
• 5-year, 4-hour onsite, 13x5 coverage for hardware (UR888E)
• 5-year, 4-hour onsite, 24x7 coverage for hardware (UR889E)
• 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UR890E)
• 5-year, 24x7 SW phone support, software updates (UR891E)
• 3 Yr 6 hr Call-to-Repair Onsite (UW365E)
• 4 Yr 6 hr Call-to-Repair Onsite (UW366E)
• 5 Yr 6 hr Call-to-Repair Onsite (UW367E)

HP Networking Services

Services that add value to your business
The warranties on HP Networking products provide a robust foundation for ongoing network support, but many customers have advanced support needs. Today's enterprise businesses, regardless of their size, are under increasing pressure to reduce the cost and complexity of supporting their network infrastructures. Demand for new services from businesses and their end users is constantly increasing. HP offers an affordable, comprehensive portfolio of networking services for organizations of all sizes. HP has a unique services advantage you can benefit from, and HP is the only vendor in the IT industry that can provide integrated and consistent support for your entire technology infrastructure worldwide, including networking, servers and storage, and imaging and printing, as well as desktop and mobile computing, to help you grow your business with expert support that is affordable, personal, and scaled to your needs. HP Networking's implementation and design centers simplify your network planning, while HP Technology and Enterprise Services deliver choice and flexibility.

HP provides a full range of custom services to meet the end-to-end networking needs of our customers. HP Network Lifecycle Services form the core foundation of network consulting, assessments, planning, design, integration, deployment, and management. They are available as standalone services or can be crafted to deliver solutions across the services portfolio, spanning network performance, network security and risk management, global deployment, data center networking, wireless LAN/mobility, and Unified Communications and Collaboration.

Documentation:

HP E2810 Switch Series Datasheet (.PDF)