HP V1900 Switch Series

Overview:

The HP 1900-8G Switch delivers entry-level Layer 2 Gigabit switching solutions in a compact and quiet desktop enclosure that is customized and priced for small and midsized organizations. Without sacrificing the functionality normally required on managed networks, this managed switch offers tremendous value to small and medium businesses that need a level of control over their network not offered by unmanaged switching products—but also require a low-cost solution. The 1900-8G switch helps build a voice-ready network with QoS, RADIUS authentication, and other features. The switch has seven 10/100/1000 ports, and a dual-purpose Gigabit port (configurable as 10/100/1000 copper or SFP-based fiber) to connect to high-performance computers, servers, or network backbones. To provide improved use of network bandwidth and outstanding voice and data quality, businesses can direct traffic flow according to their needs.

• Network access security
• Out-of-the-box setup when defaults are accepted
• Enhanced intuitive management options
• Quality of Service (QoS)
• Fanless design for quiet operation

Features and Benefits:

Management

• RADIUS accounting support — separates RADIUS accounting server support per SSID; provides detailed session, usage, and billing information for each client activity
• Uni-Directional Link Detection (UDLD) — monitors cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bi-directional link into uni-directional; this prevents network problems such as loops
• Enhanced browser-based interface — allows even the most novice users to configure the switch during initial setup and monitor it during normal operation

Performance

• Half-/Full-duplex autonegotiating capability on every port — doubles the throughput of every port
• VLANs — segment the network by grouping users based on their data or traffic exchange requirements; help ensure improved use of available bandwidth as traffic flow is directed according to the needs of the business
• Advanced QoS and traffic shaping — traffic prioritization, using IEEE 802.1p Quality of Service (QoS) and Type of Service (TOS) with Differentiated Services Code Point (DSCP), helps ensure that critical time-sensitive traffic like voice is given the priority needed for quality communications
• Rapid Spanning Tree Protocol support — improves network compatibility, scalability, and availability
• Flexible Gigabit uplink — multiple units can be daisy-chained together via the built-in copper Gigabit uplink port or be connected to a network backbone via SFP-based fiber modules
• IGMP snooping — multicast filtering improves network performance, instead of flooding traffic to all ports

Resiliency and high availability

• IEEE 802.1D Spanning Tree Protocol (STP) — provides redundant links while preventing network loops
• Link aggregation (trunking) — allows any number of ports to be grouped together automatically using Link Aggregation Control Protocol (LACP), or manually, to form an ultra-high-bandwidth connection to the network backbone; helps prevent traffic bottlenecks

• IEEE 802.1X and RADIUS network logins — control port-based access for authentication and accountability

Warranty and support

• 3-year warranty — with advance replacement and next-business-day delivery (available in most countries)
• Electronic and telephone support — limited electronic and telephone support is available from HP; refer to www.hp.com/networking/warranty for details on the support provided and the period during which support is available
• Software releases — refer to www.hp.com/networking/warranty for details on the software releases provided and the period during which software releases are available for your product(s)

Specifications:

	V1900-8G Switch (JD865A)
Port
	7 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) 1 SFP dual-personality 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) Supports a maximum of 8 autosensing 10/100/1000 ports
Physical characteristics
Dimensions	5.31(d) x 8.86(w) x 0.89(h) in. (13.5 x 22.5 x 2.25 cm)
Weight	1.76 lb. (0.8 kg)
Memory and processor
	Vitesse VSC7398 @ 25 MHz, 128 KB SDRAM, 2 MB flash
Performance
100 Mb Latency	< 5 µs
1000 Mb Latency	< 5 µs
Throughput	11.3 million pps
Routing/Switching capacity	16 Gbps
MAC address table size	8192 entries
Environment
Operating temperature	32°F to 113°F (0°C to 45°C)
Operating relative humidity	10% to 90%, noncondensing
Non-Operating temperature	-40°F to 158°F (-40°C to 70°C)
Non-Operating relative humidity	10% to 95%, noncondensing
Electrical characteristics
Voltage	100-240 VAC
Frequency	50/60 Hz
Safety
	UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
Notes
	7 Gigabit ports can be operated in combination; only the eighth can be used with the SFP port. The HP V1900-8G (JD865A) Switch was formerly sold as the 3Com OfficeConnect Managed Gigabit Switch 8 (3CGSU08A) and may ship with this product labeling.

Additional Features:

(Applies to All Switches in Series)

Services and Support:

HP Care Packs for HP Networking (All Models in Series)

• 3-year, 4-hour onsite, 13x5 coverage for hardware (UV786E)
• 3-year, 4-hour onsite, 24x7 coverage for hardware (UW485E)
• 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UW488E)
• 3-year, 24x7 SW phone support, software updates (UV789E)
• Installation with minimum configuration, system-based pricing (UW451E)
• 4-year, 4-hour onsite, 13x5 coverage for hardware (UV787E)
• 4-year, 4-hour onsite, 24x7 coverage for hardware (UW486E)
• 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW489E)
• 4-year, 24x7 SW phone support, software updates (UV790E)
• 5-year, 4-hour onsite, 13x5 coverage for hardware (UV788E)
• 5-year, 4-hour onsite, 24x7 coverage for hardware (UW487E)
• 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW490E)
• 5-year, 24x7 SW phone support, software updates (UV791E)
• 3 Yr 6 hr Call-to-Repair Onsite (UW491E)
• 4 Yr 6 hr Call-to-Repair Onsite (UW492E)
• 5 Yr 6 hr Call-to-Repair Onsite (UW493E)

HP Networking Services

Services that add value to your business
The warranties on HP Networking products provide a robust foundation for ongoing network support, but many customers have advanced support needs. Today's enterprise businesses, regardless of their size, are under increasing pressure to reduce the cost and complexity of supporting their network infrastructures. Demand for new services from businesses and their end users is constantly increasing. HP offers an affordable, comprehensive portfolio of networking services for organizations of all sizes. HP has a unique services advantage you can benefit from, and HP is the only vendor in the IT industry that can provide integrated and consistent support for your entire technology infrastructure worldwide, including networking, servers and storage, and imaging and printing, as well as desktop and mobile computing, to help you grow your business with expert support that is affordable, personal, and scaled to your needs. HP Networking's implementation and design centers simplify your network planning, while HP Technology and Enterprise Services deliver choice and flexibility.

HP provides a full range of custom services to meet the end-to-end networking needs of our customers. HP Network Lifecycle Services form the core foundation of network consulting, assessments, planning, design, integration, deployment, and management. They are available as standalone services or can be crafted to deliver solutions across the services portfolio, spanning network performance, network security and risk management, global deployment, data center networking, wireless LAN/mobility, and Unified Communications and Collaboration.

Documentation:

HP V1900 Switch Series Datasheet (.PDF)